1:Logicaln scanning
  逻辑扫描
  1.1|------------------------------------------ |       
      |     initial LBA position:x               |
      |      开始位置                            |
      |     final LBA position:xxxxxxxx          |                            |       结束位置                           |
      |     reversive scanning:on                |
      |      反向扫描打开关闭    |
      |     number of passes:3                   |
      |      通过的次数                          |
      |     perform writing test:on              |                            |      执行写测试打开关闭                  |
      |     verif. instead of reading            |                            |      读版本代替                          |
      |     put defects to:p-list                |
      |      放置默认列表                        |
      |                                          | 
      |------------------------------------------|
2:disc firmware zone
  固件地区
  2.1 work with momeory buffer
      操作存储缓冲器
      2.1.1 memory buffer reading
            存储缓冲器读
      2.1.2 memory buffer writing
            存储缓冲器写
  2.2 work with sa
      操作sa
      2.2.1 checking of disc fw structure
          检查盘片固件结构
      2.2.2 sa surface checking
          sa表面检查
      2.2.3 reading of the modules
          读那个模块
      2.2.4 writing of modules
          写那个模块
      2.2.5 reading modules groups
          读全部模块
      2.2.6 writing modules groups
          写全部模块
      2.2.7 sa write test
          sa写测试
      2.2.8 modules repairing
          模块修理
      2.2.9 transltor regeneration
          扇区再生
      2.2.10 spindle stop
           主轴停转
  2.3 LDR-file loading
      加载ldr文件
  2.4 LDR-file creation
      制造ldr文件
  2.5 security subsystem
      安全系统
3: disc id
   盘片id号
4: defects table
   缺陷表
   4.1 view p-list
       查看p-list
   4.2 view g-list
       查看g-list
   4.3 move g-list defects to p-list
       转移g表到p表
   4.4 erase g-list
       擦除g-list
   4.5 erase g-list and p-list
       擦除g-list和p-list
   4.6 import from defectoscope
       引入探测器
5: selfscan
   自检
   5.1 start selfscan
       开始自检测试
   5.2 stop selfscan
       暂停自检测试
   5.3 view selfscan state
       查看自检测试状态
6: exit
   退出